Onboard Underhood Air Compressor from VMAC

Hydraulic truck cranes are mobile cranes used to lift thousands of pounds. HoriZon Truck & Body Ltd. provides hydraulic cranes in Lethbridge from top manufacturers like Dhollandia, GrainMaster, and Link. Browse and check the features of our wide range of hydraulic cranes. Listed below are the products we sell:

• DH-RP.15 1000 from Dhollandia
• DH-RP.15 from Dhollandia
• 8K and 10K self-steer Link suspensions
• 13.5K self-steer Link suspensions
• GrainMaster contractor/landscaper bodies
• GrainMaster MPII bodies
• GrainMaster MPIV bodies
• GrainMaster super-duty decks

DH-RP.15 1000 from Dhollandia

The DH-RP.15 1000 kg is the top model fold-away lift from Dhollandia with half-dip platform ride. This model is light-weight of three lifts but is robust for half-dip platform ride from the vehicle floor to the ground. In comparison to the DH-RM.20 with level ride, the DH-RP.15 is a more economical solution for unloading pallets and boxes, general freight and expediting.

Features of DH-RP.15 1000 are:

• Designed for straight trucks up to 26T GVW (excl. refrigerated bodies)
• Available with power-down (double acting descend) option for extreme winter conditions
• Available with walk-ramp kit
• Provides maximum platform stability and operational reliability, with a minimal proper weight
• Excellent price-quality ratio

Platform of DH-RP.15 1000:

• Reinforced steel base section with aluminium point, or weight saving full aluminium platform
• The folding and unfolding of the platform are assisted by powerful torsion springs

Functional and mechanical characteristics:

• Half-dip ride. Progressive platform tilt while lifting or lowering
• Alternative available with level-ride and automatic tilt at ground level
• Fixed stabilizer rods, platform orientation is only adjustable during installation

Hydraulical characteristics:

• 2 double-acting lift cylinders (Power-down)
• Electrical safety valves on all cylinders
• Manual emergency operation on all electrovalves
• Cylinder piston rods in hard-chromed stainless steel
• Cylinders equipped with rubber gaitors and lubrication
• Pump unit 12V or 24V DC, accessible on 4 sides for easy maintenance

Electrical characteristics:

• Arctic exterior control box with IP67 rated sealed contacts, and a main battery isolator switch with removable key 
• Electrical controls without sensitive electronic components
• Safe exterior controls with compulsory 2-hand operation
• Electric motor with thermal cut-out fuse

Fitting:

• Bolt-on mounting plates for quick and easy fitting
• Premounted mounting plates at a fixed center distance
• Integrated floor plate for flush mounting available as an option
• Robust bed-extension plate with side ladders available as option
• Fixed 3-piece bumper bar available as option
• Fixed 3-piece bumper bar + integrated light boxes available as an option

DH-RP.15 from Dhollandia

The Dhollandia fold-away lifts DH-RP.15 twin cylinders is available with maximum operational reliability along with great ease of use. Using easy controls and fast deployment, the DH-RP.15 is ideal for light distribution transport and the short-term truck rental business. In the driving position, the platform of the fold-away lift is safely stored under the vehicle. This lift is extremely fit for operations with frequent access to loading docks, for demountable bodies and other situations where frequent, quick and direct access to the rear vehicle doors is essential.

Platform of DH-RP.15:

• 50”x 86” galvanized steel base and aluminum flip platform
• Optional 50”x 86” full aluminum platform

Functionality – mechanical characteristics:

• Torsion spring to support the manual deployment of the platform
• Total installed weight can be as low as 600 lbs

Hydraulic characteristics:

• Hydraulic lock valves on both cylinders for maximum safety
• Manual emergency operation on all electro valves (1)
• Cylinder piston rods in chromed stainless steel (INOX)
• Standard power-down hydraulic system

Electrical controls:

• Standard potted up/down toggle switch (2)
• Optional external controls with battery switch and emergency stop (3)
• Optional 2 buttons handheld remote on spiral wire (4)

Fitting of the lift:

• Bolt-on mounting plates for quick and easy fitting (no welding requirement)
• Galvanized steel deck extension and dock bumpers as standard equipment

Finish and maintenance:

• Standard hot dip galvanized finish
• All pins are zinc plated
• Low maintenance bushings and grease ports on all pivot points

13.5K Self-Steer Link Suspensions

Specifications:

• Weight (base unit) 934 lbs
• Travel 13 inches
• Lift 9.5 inches
• Envelope 22 inches
• Ride height 8 - 16.5 inches

GrainMaster Contractor/Landscaper Bodies

Standard specifications:

• Length 9’-16’
• Front 36" standard - 10 gauge steel
• Sides 18" standard - 10 gauge steel
• 3"x3" square tube top rail
• Tailgate 28" standard - 10 gauge steel - 3-way
• Floor 10 gauge steel - sloped edges for easy, clean dumping
• 12" centred 80.000 yield strength
• 4" I-Beam cross-members for the strongest floor on the market
• Shock proof rubber mounted lighting
• Heavy duty check chains
• Plank gussets
• Adjustable tailgate locking hardware
• Self-cleaning rub rail, tailgate and bumper

Options:

• Custom sizes available
• Cab shields
• Tarping systems
• Side boards
• 3/16" floor thickness
• Underbody hoists
• Mud flaps
• Custom paint

GrainMaster MPII Bodies

Standard specifications:

Platform:

• 10 gauge smooth steel deck
• 10 gauge formed side and front rails
• 16" centred 4" I-Beam cross-members
• 14" centred formed 12 gauge runners
• 8" C-Channel rear rail - inverted to protect lights
• 8" C-Channel mounting beams - Attached
• 3-1/2" x 3-1/2" x .188 wall square tubing platform pockets

Sides and front:

• 42" or 48" height standard
• 14 gauge formed panel - 3"x3" x.150 wall square tube top rail
• 3"x 3" x.150 wall square tube vertical end post
• 2"x 2" x 3/16" bottom angle bolt-down

End Gate:

• 32" or 42" or 48" 2-plece swing c/w check chains
• 10 gauge formed c/w overlap lip on bottom
• 3/16" HRSS and 2"x 2" x.125 tube framing
• Greaseable strap hinges and spring pin locking hardware to platform
• Quick opening centre gate latch

Lighting:

• Harness rubber mounted shock proof D.O.T. LED lighting

Paint:

• Two-part epoxy black primer – armour shield polyurethane finish
• Standard colors - solid one color black, red or grey

Reflective Tape:

• 2" side and rear platform rails (red and white)
• 11"/7" pattern D.O.T. C2

Options:

• 8'6" wide - prep and prime only finish
• 54" or 60" side height - custom paint color
• Checker-plate deck - 5" mounting beams (in lieu of 8")
• 3/16" smooth steel deck - side-swing door (36"x36" opening)
• 2" x 6" TIG wood deck - tarps - flip style and crank style
• Cab protector - 74" wide x 24" deep - hoists
• ICC rear step bumper - tailgate loaders
• Mud flaps c/w anti-sail hangers

GrainMaster MPIV Bodies

Standard specifications:

Platform:

• 3/16" smooth steel floor
• 16" centred 4" I-Beam cross-members
• 5" x 3" x 1/4" angle - front and side rails
• 5" c-channel rear rail - inverted to protect lights
• 5" c-channel mounting beams - attached
• 2" x 6" x .188 x 12" tube style rear corner posts

Front

• 42" high - angled corners
• 3" x 3" x .150 wall tube frame - 10 gauge smooth steel face

Sides

• 12" high "fold-down style"
• 12 gauge formed c/w 2" x 2" x .125 wall bottom tube
• Greaseable strap hinges - spring pin locking in up position

Gates

• 12" high 2-piece swing-out c/w check chains
• 10 gauge formed c/w overlap lip on platform
• Greaseable strap hinges - spring pin locking hardware to platform
• Quick opening centre gate latch

Lighting:

• Harness rubber mounted shock proof d.o.t. - led lighting

Paint:

• Two-part epoxy black primer – armour shield polyurethane finish
• Standard colors - solid one color black, red or grey

Reflective Tape:

• 2" side and rear platform rails (red and white)
• 11"/7" pattern D.O.T. C2

Options:

• 8'6" width
• 3/16" checker-plate floor
• 2" x 6" tongue and groove wood flooring
• (Includes 7" rear channel rail in lieu of 5" rear channel rail)
• Laser cut front window
• ICC rear step bumper
• Sure grip side step
• Mud flaps c/w anti-sail hangers
• Prep and prime only finish
• Custom paint color
• 7" or 8" mounting beams (in lieu of 5")

GrainMaster SuperDuty Decks

Standard specifications:

• 5" x 3" 1/4" side and front rails
• Inverted channel rear rail
• 3/16" smooth steel deck surface
• 4" I-Beam cross-members on 12" centres
• 5" Mounting channel – heavy-duty u-bolts
• Punched recessed heavy-duty stake pockets
• 3" x 3" x 150 wall tube framed front with 10 gauge hrss face
• Mesh window - grab handles - side steps
• Heavy duty rear step bumper
• Rubber mounted clearance lamps
• Harness system lighting
• 2 coats rust-inhibitor primer
• 2 coats black acrylic enamel finish
• Mud flaps c/w anti-sail bars
• 8’ to 30’ lengths
• Standard 102” OD width

Options:

• Checker-plate deck surface
• 8' centred I-Beam cross-members
• 2" x 6" tongue and groove spruce flooring
• Wagon oak flooring
• Enclosed double door bulkhead fronts
• Wrap-around style fronts
• Crane fronts
• Load binder winches - straps
• Recessed deck surface tie rings
• Tailgate loaders
• Removable stake sides
• Underbody scissor action hoists
• Underbody tool boxes
• Hoops and tarps
• Exterior wrap style pockets